easy5 pts · first answer countsmicrocontrollersbootloader
Using the built-in ROM bootloader
A board was flashed with firmware that disables the SWD pins at startup, so the debugger cannot connect. Which recovery option works on many STM32 parts?
Discussion 0
Join free to post in the discussion.
Related questions
- What a bootloader doesEmbedded Systems Engineer
- What an open-drain output can doEmbedded Systems Engineer
- Button wired to ground with pull-upEmbedded Systems Engineer
- Meaning of an NRST pinEmbedded Systems Engineer
- Setting bit 5 of a registerEmbedded Systems Engineer
- GPIO alternate function modeEmbedded Systems Engineer
- Polling versus interruptsEmbedded Systems Engineer
- Hooking an ISR in CMSIS startup codeEmbedded Systems Engineer